EMT Practice Test

1. Question Content...

---

Question1: A NetBackup Master Server has commenced writing four long-running duplication jobs on an AdvancedDisk disk pool. The value of Maximum concurrent jobs for the storage unit and Limit I/O streams for the disk pool are both set to 4.
There are 35 jobs queued on the Master Server that require this disk pool:
5 replication jobs with priority 9999
10 backup jobs with priority 999
20 duplication jobs with priority 99
Two restore jobs that require this disk pool are then submitted with default priority.
Which job type goes active next?

Question2: A restore must be performed. An administrator is attempting to view the valid images for a client, but the following error occurs:
WARNING: Server does not contain any valid images.
Which two parameters may be configured incorrectly& (Select two.)

Question3: The following storage lifecycle policy was used to back up data from a client.
Storage Lifecycle Policy
Backup to AdvancedDisk
Duplication to tape
Duplication to AdvancedDisk
How should an administrator restore data from the tape using NetBackup?

Question4: An administrator runs the following command on the Master Server to test connectivity to a client:
bptestbpcd -client clientA
The administrator receives the following message:
< 16> bptestbpcd main: Function ConnectToBPCD (clientA) failed: 25 cannot connect on socket
Which two reasons may cause the error message? (Choose two.)

Question5: An administrator has a scheduled policy that backs up 20 clients, each with multiple mount points and multiple streams enabled. One of the jobs has failed and is in an Incomplete state.
How should the administrator verify the incomplete job runs prior to the next scheduled backup?

Question6: An administrator has a backup policy with the following policy attributes:
3 paths listed in the Backup Selections list

5 clients listed in the Clients list

Allow multiple data streams is selected

Limit Jobs per policy is set to 4

How many jobs go Active when the job is started, excluding parents job?

Question7: Which file contains LiveUpdate server configuration?

Question8: An administrator needs to store secure tape copies of protected data to an offsite location.
How can the administrator automatically eject tape media daily and create detailed reports?

Question9: Which utility should an administrator use to verify tape device configuration?

Question10: An administrator wants to use a client as the VMware backup host.
Where is the name of the VMware backup host entered in NetBackup?

Question11: Which utility should an administrator use to verify library device functionality?

Question12: Which two prerequisites must an administrator perform to enable restoration of individual objects and attributes in Active Directory? (Select two.)

Question13: A tape library had the robot firmware upgraded and now the robot is reading the barcodes with additional characters.
How should an administrator enable NetBackup to use the same characters as before the firmware upgrade occurred?

Question14: Which two storage unit types can be configured in NetBackup? (Select two.)

Question15: What is the image removal behavior for relocated images from a basic disk staging storage unit when the high water mark is reached during a backup?

Question16: Which two protocols can be used to automate NetBackup release Update installation on clients through LiveUpdate? (Select two.)

Question17: An administrator needs to decrease the total amount of time required to back up a UNIX file server, but requires a full backup every night for recovery purposes.
How should the administrator proceed?

Question18: Which command should an administrator run to display all images written to both disk and tape for a particular client?

Question19: Which two schedule types are allowed for the NBU-Catalog policy type? (Select two.)

Question20: Which operation compares the contents of an image to the NetBackup catalog?

Question21: Which statement applies to a NetBackup calendar based schedule in a Windows policy type?

Question22: An administrator has an environment that runs over one thousand jobs a night. Some nights there are hundreds of jobs queued waiting for a resource.
Which action should the administrator take in the event that specific jobs need to run when a resource next becomes available during that evening' s backup session?

Question23: Where should an administrator look in the NetBackup Administration Console to determine whether an AdvancedDisk storage server is configured?

Question24: A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a million small files. Backups for all other clients on the same network are performing adequately.
What should the administrator modify to improve performance for the client?

Question25: Which configuration file should an administrator modify to enable local fingerprint caching on a NetBackup MSDP client?

Question26: Which command should the administrator use to determine which storage lifecycle policy's image copies are incomplete?

Question27: How frequently does content router queue processing (CRQP) run, by default?

Question28: Using the default values in the activity monitor, a failed job is discovered among hundreds of jobs that ran during the evening. The administrator would like to view all related jobs to verify they completed successfully.
Where in the activity monitor can the administrator find all related jobs?

Question29: An administrator of a multi-site, multi-domain NetBackup environment wants to be able to provide redundancy for backups as well as protecting the NetBackup image database. All backups must have on- site and off-site disk copies as well as off-site tape copies and must be restorable at all times, even if a single NetBackup server/storage failure occurs.
Which NetBackup feature should the administrator use to implement the functionality?

Question30: Which action is performed by the NetBackup deduplication plug-in?

Question31: A Windows 2008 R2 64-bit client backup job hung. The NetBackup administrator cancelled the job in the Administration Console and restarted the NetBackup Client Service on the client. The administrator initiated another backup of the client, and it also hung.
Which NetBackup client process should be terminated to allow new backups to occur?

Question32: Which command is used to determine the state of an AdvancedDisk storage server?

Question33: Which is the default volume pool used by catalog backup while backing up to tape?

Question34: An MSDP Media Server is experiencing performance issues when running multiple deduplication backup jobs concurrently over 10 GbE. When switched to AdvancedDisk on the same Media Server, the backups perform well.
Which step can be utilized to migrate the performance issues?

Question35: An administrator wants to specify which networks or interfaces to use for outgoing NetBackup traffic from a selected host.
Which option under Master Server Host Properties should the administrator use to configure this?

Question36: Which command should an administrator use to check the number of images that need to complete the storage lifecycle secondary processing?

Question37: Backups of a newly added Windows Server 2008 guest virtual machine are failing with the following status:
156: snapshot error encountered
The associated bpfis process log indicates that the attempt to quiesce this virtual machine failed.
Which two steps should the administrator review to help resolve this issue? (Select two.)

Question38: What should administrator to do enable backups to span multiple BasicDisk storage units?

Question39: A NetBackup administrator configures a policy to perform file system backups of multiple client systems using the Allow multiple data stream feature. All other policy attributes are at default settings.
Which Master Server parameter must be configured to enable the backup jobs from a client to run concurrently?

Question40: The Master Server catalog is being recovered to a new server. The administrator receives the message displayed below:
Please insert the following media and run the volume configuration wizard or the vmupdate command to update the NetBackup database.
Host - train1
MediaID - GBP847
Barcode - GBP847S1
In the Administration Console, barcode GBP847S1 is associated with media ID P847S1.
How should the administrator proceed?

Question41: What is the default length of time the true image restore (TIR) information is retained in the NetBackup catalog?

Question42: Which policy directive(s) should an administrator place in the Backup Selections tab to ensure the system is protected when backing up a Windows server?

Question43: Backup jobs to an MSDP storage unit of a large EXT3 file system for a Linux client connected via a 1 GbE network are taking excessive time.
Which two settings should an administrator change to improve the performance of the backups? (Select two.)

Question44: What is required to implement Auto Image Replication?

Question45: An administrator wants to review the throughput of backup clients to improve performance.
Which area of the NetBackup Administration Console displays the throughput of backups for all clients?

Question46: An administrator took Media Server, mediaA, offline for maintenance and set up a new Media Server, mediaB, with access to the previously backed up data. When restores are performed for data that was backed up by mediaA, the restores fail.
Which setting in the Host Properties must the administrator modify to allow successful restores?

Question47: A file system on a server is corrupt and a restore is required. The system is being backed up using True Image Restore with move detection enabled.
The most recent backups of this file system are displayed below.
Monday: A full backup

Tuesday: A differential incremental backup

Wednesday: A cumulative incremental backup

Thursday: A differential incremental backup

Friday: A differential incremental backup

What is the minimum number of backup images that will be used to fully restore the server to its most current state?

Question48: Backup jobs end with the following series of messages in the Job Details:
Error bpbrm (pid=62586) db_FLISTsend failed: Unable to connect to the database ( 2505)
1 2/05/2013 15:39:45 - job 63389 was restarted as job 63390
Failed to get status code information (2505)
Which process is failing to respond?

Question49: Refer to the exhibit.
An assigned backup tape contains four images, two of which are expired. A new backup is initiated.
How does NetBackup write the new image?

Question50: A storage unit group is configured that has disk and then tape listed. During a backup session, jobs start retrying and then running on the tape device only.
What is a likely cause of the change?

Question51: A backup image on tape is due to expire in one week. The administrator needs to keep the image available for restore indefinitely.
Which two methods can be used to accomplish this goal? (Select two.)

Question52: What happens if the Maximum data streams property is enabled for a particular client?

Question53: A policy is created using the Standard policy type. The default settings are used. Linux hosts s1 and s2 are added in the client list and ALL_LOCAL_DRIVES is specified in the Backup Selection.
Host s1 has the mount points listed below:
//opt/usr/usr/home
Host s1 has the mount points listed below:
//proc/tmp/usr
How many streams will be created when the policy runs for both clients?

Question54: An administrator initiated a manual backup of clientA on master1. The backup failed with the message:
client is offline (1000)
Which Host Properties settings should an administrator modify to resolve this issue?

Question55: Which schedule can be configured as a synthetic backup in addition to the full backup schedule type?

Question56: An administrator has backups failing with status code 96 due to tapes being prevented from returning to the scratch volume pool after the images they contain expire.
What prevented the media from returning to the scratch pool?

Question57: Which scenario accurately describes the creation of a full synthetic backup using tape?

Question58: An administrator wants deduplication clients in a remote office to perform backups so that less data is sent over the wide area network (WAN).
Which change would reduce the amount of data sent over the WAN?

Question59: An administrator tries to suspend an active job from the NetBackup Activity Monitor, but discovers that the option is grayed out.
What is preventing the administrator from suspending the job?

Question60: Which command can an administrator execute on a NetBackup client to measure backup performance?

Question61: What are two possible causes for job failure when a Windows policy is configured to use Accelerator?
(Select two.)

Question62: An administrator discovers that backup images configured with a fixed two-week retention are failing to expire. What is the possible cause of this issue?

Question63: Which command can be used to recover the NBDB from the staging location?

Question64: Which volume pool must be manually created in NetBackup?

Question65: Which backup storage is unsupported with Media Server load balancing?

Question66: In which order should an administrator perform upgrades to a major release in a NetBackup environment?

Question67: In the NetBackup Administration Console or Java console, how should an administrator change a disk pool to down status?

Question68: Which NetBackup command is used to report the potential free space of AdvancedDisk storage units?

Question69: A VMware has been configured to back up a Linux virtual machine.
Which condition must be met to ensure all data is flushed from memory to disk?

Question70: Which storage unit group option causes NetBAckup to choose the least recently selected storage unit in the list as each new job is started?